Description
An easy to use two-part teak cleaner and restorer kit – Please use both steps 1 & 2 as the chemical reaction between the two products is what leaves teak looking brand new.
Features
- Remove gray weathering, dirt, rust, fish blood and fuel stains, leaving teak with that fresh sanded look
- No hard scrubbing or bronze wool required
- Will not soften deck seams
- Avoid contact with painted or varnished surfaces
- Made in the USA
- Kit contains: 32 oz Formula No. 1 and Formula No. 2 along with 2 scrub brushes to use with each step
Directions
Snappy™ Teak-Nu™ Formula No. 1 must be used with Snappy™ Teak-Nu™ Formula No. 2 using bristle brushes included with kit to achieve best results. Rinse brushes thoroughly after every use
FOR BADLY SOILED, OILED OR COATED TEAK:
1. Wear protective gloves. Apply Snappy™ Teak-Nu™ Formula No. 1 directly to wet deck. Use bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub wood. Avoid contact with painted or varnished surfaces. Rinse brushes after use.
2. Next, use bristle brush to spread Snappy™ Teak-Nu™ Formula No. 2 uniformly over the treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water.
FOR LIGHTLY SOILED TEAK:
1. Wear protective gloves. Use water to dilute Snappy™ Teak-Nu™ Formula No. 1 to an approximately 50% solution. Use bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes thoroughly after use.
2. Next, use water to dilute Snappy™ Teak-Nu™ Formula No. 2 to an approximately 50% solution, then use bristle brush to spread uniformly over treated area. Use soft bristle brush to scrub lightly to attain a uniform light color. Rinse treated area thoroughly.
When the treated area is completely dry, the deck will look like it has been freshly sanded.
HELPFUL SUGGESTIONS
Immediately rinse off any drips, spills or splatters of Snappy™ Teak-Nu™ Formula No. 1 on painted or varnished surfaces, aluminum, fiberglass or any surface other than teak. Snappy™ Teak-Nu™ Formula No. 1 may damage paint or varnish if not immediately removed. Rinse brushes after each use.
To help avoid drips, spills or splatter onto painted or varnished surfaces adjacent to teak being treated, apply Snappy™ Teak-Nu™ Formula No. 1 with a paint brush. Spray a mist of water on any areas which have dried before applying Snappy™ Teak-Nu™ Formula No. 2.
Snappy™ Teak-Nu™ Formulas Nos. 1 and 2 can be used on bare mahogany before refinishing to remove discolorations without bleaching the wood.
